Check the caps
before they ship.
Your approved sample sets the reference for production. Use this checklist to inspect finished caps and packed cartons, document discrepancies and decide which goods are ready for dispatch.

Finishing checks on caps at a worktable. Agree the inspection scope and acceptance criteria for your own order.
Agree on the inspection plan
Ask what will be ready and packed on the inspection date. List each style and color, the quantity ordered and the cartons it should occupy. Agree who will inspect, how units will be selected, and what counts as an acceptable result. If you use a third-party inspection service, agree the scope and sampling rules before booking.
Use the current purchase specification, approved sample, artwork and packing plan. The sample approval guide explains how to tie those references to a version. If reference files conflict, resolve that before judging the production lot.
Draw units from different cartons
First confirm which cartons and variants are available. Select units according to the agreed inspection plan rather than relying on a single carton or a set of caps already laid out for review. Record which cartons were opened and how many units of each variant were checked.
For a small variant, agree how it will be represented. If one color is still being packed or could not be inspected, list it separately. A check on one variant cannot clear another that was unavailable.
Check the cap inside and out
Compare the profile, panel alignment, brim and logo with the approved reference. Put color references side by side under consistent lighting. Inspect the stitching and look inside at the sweatband, seam finish and labels. Open and close the rear adjustment to check its function on the inspected caps.
Use the agreed measuring method and tolerances. For example, a five-panel cap with an adjustable strap should be measured at the closure setting specified in its brief. Record actual measurements and photograph the measurement setup if a result is outside the agreed range. The manufacturing checklist describes common review areas.
Match the cartons to the order
Use the packing list to reconcile quantities by style and color. On opened cartons, check the unit count, assortment and packaging against the agreed instructions. Confirm that the carton marks match the contents and the ship-to references you supplied.
Check that labels and tags match the variant inside the package. If you supplied a barcode, agree what scan check is required and verify the expected result. The packaging guide can help you define those requirements before the order.
Record findings and decide what to recheck
For each discrepancy, record the style, color, carton, quantity inspected, quantity affected, expected requirement and observed result. Attach one photo that identifies the item and one close-up that shows the issue. For example, if a carton mark lists a different color than the caps inside, record both references and check whether the same mismatch appears in other cartons covered by the plan.
Agree whether the affected goods should be sorted, corrected or held while the extent is verified. Record what needs a second inspection, who will confirm it, and what evidence will close the item. Keep any uninspected or held variants separate in the written dispatch decision.
Questions about bulk inspection.
Does a passing sample guarantee every cap in the order?
A sampling decision only reflects the scope and rules agreed for the inspection. Record which units and variants were checked, and discuss any requirements that need broader checks in advance.
What if one color is missing at inspection?
Record that color as pending. Agree a separate review or dispatch decision for it once it is available.
When should I share special inspection requirements?
Share them with the brief so the team can confirm the measuring method, any required documentation and the point in production when the checks should happen.
Define what you’ll check.
Share the cap specification, variant breakdown and any inspection requirements with your brief.
Discuss your inspection requirements ↗